Interior doors

Interior doors

The choice of interior doors is not as easy as it may seem. What material and what type of design to choose, and how to correctly enter the door to the design of the room – read our detailed article. A selection of the best photos attached.

  1. Naturally, the ideal option would be doors made from natural materials. We will not tire of repeating that good material is not only an aesthetic choice, but also the basis for the longevity of a given design element, and this figure can more than pay back the costs. In a question of the choice of interroom doors the best choice – doors from the massif of a tree or a natural interline interval.
  2. High-quality coverage is another point that you should pay close attention to. It is high-quality coating that will help extend the service life of the door without losing their attractive appearance. In addition, high-quality varnish or laminate – it is also a matter of health!
  3. Pay attention to the fit of all elements of the door: there should not be any extra gaps in the joints of individual parts, such as grilles, frames, glass inserts or other materials.
  4. The right geometry is what matters! Only minor discrepancies of a few millimeters are permissible, otherwise you run the risk of further getting certain problems with installation and operation.
  5. Remember that the door box should be with a seal, and if glass is used in the finish, then it should be of sufficient quality to adequately carry out all the operational aspects!

Determine the material


Doors made of fibreboard, or in other words fiberboard, is a relatively cheap option. Unlike DSP, which include formaldehyde resins, which emit toxic fumes over time, fiberboard is a more environmentally friendly material. It is a plate made of pressed wood dust, the pieces of wood in which in the manufacture of the plates are steamed out, and therefore they speak about the production by the method of wet pressing.

Do not think that doors made of fiberboard look like the back walls of Soviet wall cabinets. By production of doors, DVP are ennobled by pressing with special dyes. In addition, the material goes through the so-called amplification process, which also positively affects its external and functional qualities.

In general, fiberboard doors are a good economical choice, with a number of other advantages: Fiberboard doors are moisture resistant and durable enough to serve you for a long time.


MDF is a great compromise between the price of a product and its quality. Not only is MDF an environmentally friendly material, but it also has an excellent texture that allows you to make any carved elements out of it. Therefore, if you want a door with an interesting decor, MDF will perfectly cope with such a task.  

MDF can be an excellent “stuffing” for the interior door. Exterior finish in this case can be performed, for example, from natural veneer. If you are considering more budget options, then you can stop the choice on finishing of artificial veneer or lamination.

In addition to the advantages associated with possible design delights in the performance of the door leaf, MDF has other advantages, including:

  • moisture resistance;
  • durability;
  • practicality;
  • resistance to deformation.

Solid wood

If you want the doors in your apartment to look expensive and noble, serve you for a long time, and you are ready to pay the corresponding price for this, your choice is solid wood interior doors.

Beautiful natural material, wood, has several advantages:

  • strength of the door structure;
  • excellent adhesion with finishing materials;
  • reliability of fasteners;
  • environmental friendliness;
  • high quality;
  • a wealth of design options.

But unfortunately, this material is not without flaws:

  • each door made of solid wood is, in a certain sense, universal, since the design of the tree is unique;
  • low resistance to temperature extremes and moisture (need high-quality coating and proper care);
  • the big weight of a design assuming use of extremely reliable and strong accessories.

Most often, during mass production, the surface of solid wood doors is covered with thin sheets of natural veneer – to improve moisture and heat resistance and to increase the service life. With this task veneered wooden doors cope perfectly!


Many modern styles, such as high-tech or minimalism, do not favor such natural materials as wood or artificial imitation of wood canvases. Futurism of such styles dictates the choice of completely different materials – metal, plastic, glass.

And if metal doors are not the best choice for dividing rooms, glass, on the contrary, do not look pretentious and somewhat simplify and facilitate the interior of the room . The frosted surface makes it easy to fit them into any room and use, including, as a door for the bathroom and toilet .

In addition, the possibilities of decorating glass paintings are multifaceted! The combination of frosted glass with ordinary, stained glass, sandblasted drawings – all this will help you choose a truly unique door for a unique interior!

Choose the design of the interior door

There are a large number of options for interior doors, among which are the classical swing and more interesting designs – sliding or folding. About all the details below.

Swing doors

Swing doors are the simplest and most familiar type of doors. The design of this door consists of a door leaf and a box. But even these simple doors now boast some variety of options.

Classic There are single and double. Open in one direction.
Turning Able to open not only in the usual way, but also in a vertical plane. This design requires a slightly different type of door frame and special hinges. An example of such a design is the classic plastic balcony door.
Saloon Their difference in the absence of the porch, as well as in the fact that they do not have a fixed position, due to which they are able to open in both directions.

Such a design and type of opening is currently used everywhere: both as interior doors and as entrance doors.

Sliding doors

Such a currently popular type of door constructions as sliding doors came to us from Asia, where they have been used since ancient times. Their main advantage is ergonomics.

The design is a door leaf, which is attached to the guide with rollers installed inside the beam attached to the wall. Rollers are attached to the top of the door with a special bracket.

Sliding doors can fit into the smallest room, allowing you not to save precious meters.

Let us highlight the main advantages of the sliding opening type:

  • the economy of space allowing not to spend space in the rational way;
  • construction safety;
  • Stylish and fashionable design.

The main disadvantages are low sound and heat insulation, and a higher cost compared to classic sliding doors.

Anyway, sliding doors – a stylish and modern version of the performance of interior doors. We offer you to get acquainted with interesting examples in our photo gallery:

Related article: Interior Sliding Doors

Coupe doors

Coupe doors belong to a subgroup of sliding doors, but they differ somewhat in construction from the classical type, and therefore are identified by us as an independent group.

The design of such doors is similar to the doors of classic wardrobes . But, of course, interior compartment doors are different from the doors of the cabinets weight and durability. In addition, do not forget about the presence of the handle and lock.

The compartment doors are more ergonomic than the classic sliding doors due to the fact that the sliding doors when opening not only move to the side, but also overlap each other.

Sliding doors

Another interesting type of sliding doors are doors with sliding mechanism. Such constructions are perhaps the most ergonomic option possible, because the sliding of the opening door does not occur along the wall, but inside it!

The wall in this case is made of plasterboard, and requires partial redevelopment to mount the U-shaped groove in the wall. The groove is best made of metal.

Installing the sliding door, do not forget about the correct location of the handle!

Such a door looks very interesting in the interior of any room and has the useful property of tightness in comparison with the usual sliding door.


Roto-doors are a kind of compromise between swing doors and sliding doors. The peculiarity of the roto-door is that in the process of opening the door leaf unfolds slightly and in the open position becomes perpendicular to the doorway.

This type of opening allows the open door to take up less space and, like the design of the sliding door, saves space in a small room or a small corridor .

Roto-doors have such advantages as sound insulation and tightness, and are an excellent solution for the bedroom!

Folding doors (accordion doors)

An interesting design decision seems to us the design of folding doors.

The door-accordion can perfectly fit into the interior of the living room or bedroom, as well as become an excellent option in the matter of zoning the space (for example, separating the bedroom from the dressing room).

Wood or plastic is often used as a material in the manufacture of an accordion door, but other options are possible.

The design of a folding door is a combination of several elements using movable hinges, and one of the ends of such a door is equipped with rollers moving along a guide, as is the case with the classic sliding door.

The nuances of choice and design tricks

Uniform style or violence of variety?

When choosing interior doors to an apartment, we are faced not only with the choice of material and type of opening, but also with the choice of style, which, as often happens, should “combine the incompatible”. What are we talking about? Tell you more.

If you make repairs in a separate room and together with the interior design you want to change the door, you face the problem: how to choose a door that would simultaneously fit the new interior of a bedroom or living room and fit into the corridor? However, this question also haunts those who create the design project of the future apartment.

After all, it often happens that in one living space in different rooms completely different styles get along! A bedroom in the style of gentle Provence, a living room in Art Nouveau style with its natural motifs, a laconic kitchen in the style of mimalism and a retro entrance hall – and each room places its own demands not only on furniture and interior design, but also on the door!

Of course, if you plan to choose a certain uniform style for the decoration of an apartment, then you will not have to puzzle over how to fit the door into two interiors at the same time. If you decide not to go the easy way, then we can advise you to make interior doors to order – so you can arrange them on the one hand to match the design of the hallway, and on the inside – choose the finish option, more suitable for the chosen style room.

You can also choose the doors of neutral tones and neutral design, which will allow you to fit them into any interior you choose without any extra questions!

High interior doors

We are accustomed to standard doorways, on average not reaching a ceiling of 30-50 cm (depending on the height of your ceilings). However, designers are increasingly offering us interesting concepts with the use of high doors in the interior – literally from the floor to the ceiling! What are the advantages of such structures, in addition to the unusual design solutions?

  • High doors can visually enlarge the space of a small room and “lift” the ceilings.
  • The richness of choice of style solutions and shades can easily emphasize the individuality of your design.
  • The originality of the appearance does not even need comments. Such doors are unusual and to the point.

Independent installation of interior doors

Do-it-yourself installation of interior doors is not the easiest process, which, however, allows for considerable savings in the repair process.

Of course, the nuances of assembly and installation are directly dependent on the type of construction you have chosen and the universal algorithm that is suitable for any occasion cannot be identified.

We have tried to collect for you video tutorials on installing interior doors of various types, so that this process will bring you as little trouble as possible! So, we offer to watch the video:

How do you feel about this article?

Leave a Reply